How To Open Bin File

So you may be wondering how to open it on your computer, If you ’ve downloaded an old image file of some forgotten game or program. And the BIN format is an aged file type that contains all of the information from the CD or DVD it began from. And you can not open a BIN file directly; in order to use it, you’ll need to either burn it to a slice or mount it to a virtual drive. And you can also convert the BIN file into an ISO file, which allows you to use numerous further programs to burn or mount it.

The Processes to Open The BIN file

1. Burning the BIN File

>> Find your files, and however, you’ll also need the CUE file to go with it. If you’re trying to burn the BIN file to a CD or DVD. And however, you can produce one, If you have the BIN file but can’t find the CUE file.


>> Make sure you produce a CUE file if you do not have one. Also open notepad and enter the following lines.. file”filename.bin” Double TRACK 01 MODE1/ 2352 –  Indicator 01000000. Changefilename.bin to the name of the BIN file you’re trying to burn….. and keep the citation marks.

Save the file to the same brochure as the BIN file. And the CUE file should be named exactly the same as the BIN file, except with the CUE extension. So click file→ Save As and also click the “Save as type” and from the drop down menu, then select All Lines‘ ‘ also give the file a CUE extension.

>> Open your burning programs: And as BIN is an outdated format, only aged programs completely support it, especially when it comes to multitrack BIN lines. And the popular programs include (CDRWIN, Alcohol 120, and Nero).

>> Then load the image file: And depending on the program, you may need to load the CUE file or it may ask for the BIN file. And once the image train is loaded, you should see a readout showing how important space the image will take on the slice.

>> Then start burning: And once you’ve vindicated that the image has loaded correctly, fit a blank slice and start burning. And the time it takes to burn will depend on the size of the image, your burner’s speed, and your computer performance.

>> Then test the slice: And once the burn is complete, test the slice by fitting it into the device you burned it for. And ensure that everything loads rightly, and that any tracks are in the right spot.

2. The mounting of the Image

>> The installation of the virtual drive software: A virtual drive will emulate a physical optic drive in your computer, and will allow you to “mount” the image file in it. And this tricks your computer into allowing a slice to be fitted, and the image is loaded just as if it was running from a slice.

>> The mount of the image: A program similar to WinCDEmu will place an icon in your System Charger. And right- click on this icon, hang over one of the fake drives, and also select Mount Image.

Then browse the CUE file on your hard drive. And remember that the BIN and CUE files need to be in the same folder. And once you’ve planted the CUE file, then load it to mount the image.

>> The opening of the slice: So once the image is mounted, your computer will act as if a physical slice has just been fitted. And this means Autoplay might open, or you might be asked what you want to do with the slice. And the dispatches you send depend on the contents of the slice as well as your system settings. And use the image file just as you would use a CD or DVD that you fitted in your computer.

3. The Converting of a BIN file into ISO Format


>> You have to download a conversion program. And you’ll need a conversion program to change the BIN file to an ISO file. And once you change it to an ISO file, you’ll be suitable to mount or burn the flie with numerous further programs. And one of the most popular free conversion programs is MagicISO.

>> The opening of the motor tool: Then start MagicISO and then click the Tools menu and then select BIN to ISO.

>> Then you have to browse for your BIN file.

>> Then you have to choose the name for the new ISO file.

>> Then the conversion of the file: Just click Convert to convert the BIN file to an ISO file,  it may  take a while.

>> Then the mounting of the ISO file: So once the train has been converted, you can mount it using a virtual drive. And however, right-click on the ISO file and then select “Mount“, If you’re using Windows 8 or OS X.

>> Then the Burning of the ISO file: So you can burn ISO files to discs using most burning programs. 

>> Then explore the ISO file: As you can use, programs like MagicISO to explore the contents of the ISO file, allowing you to copy specific files from within the archive.


Leave a Reply

Your email address will not be published. Required fields are marked *

You May Also Like